Santo Anjo mineral water profile

Santo Anjo is a still water from Brazil. Sodium-bicarbonate type, low mineralization.

Santo Anjo mineral content

Ionmg/L
Calcium (Ca²⁺)14.6
Magnesium (Mg²⁺)1.1
Sodium (Na⁺)58.2
Chloride (Cl⁻)40.4
Sulfate (SO₄²⁻)18.9
Bicarbonate (HCO₃⁻)108
At a glance
Total of these six minerals241.3 mg/L
Total hardness (as CaCO₃)41.3 mg/L
Alkalinity (as CaCO₃)88.6 mg/L
Sulfate-to-chloride ratio0.5:1

How to recreate Santo Anjo from RO or distilled water

Mineral salts to dissolve in reverse-osmosis or distilled water, calculated by the BrewWaterSolver solver with the most common homebrew salts.

Salt5 gal (18.9 L)20 L
Calcium chloride (CaCl₂)0.90 g0.95 g
Gypsum (CaSO₄)0.16 g0.17 g
Epsom salt (MgSO₄)0.52 g0.55 g
Baking soda (NaHCO₃)3.09 g3.27 g

Closest match with these salts; it can't reach Na 47.7 mg/L vs 58.2, Cl 26 mg/L vs 40.4, HCO3 121.6 mg/L vs 108 exactly.

Where these numbers come from

Spring not named on the source. Values from official label/spec sheet reproduced by a retailer or distributor. Carbonate 3 mg/L folded into HCO3 as equivalent alkalinity (x2.03).

View the original analysis

Open Santo Anjo in the solver →