Hepar mineral water profile

Hepar is a still water from France. The most magnesium-concentrated still mineral water sold in France; extreme calcium-magnesium-sulfate type, marketed specifically for digestive/constipation relief. [Cl not reported in the source data - defaulted to 0 here, not a measured zero.]

Hepar mineral content

Ionmg/L
Calcium (Ca²⁺)549
Magnesium (Mg²⁺)119
Sodium (Na⁺)14.2
Chloride (Cl⁻)0
Sulfate (SO₄²⁻)1530
Bicarbonate (HCO₃⁻)384
At a glance
Total of these six minerals2596.2 mg/L
Total hardness (as CaCO₃)1860.9 mg/L
Alkalinity (as CaCO₃)314.9 mg/L
Sulfate-to-chloride ratio–

How to recreate Hepar from RO or distilled water

Mineral salts to dissolve in reverse-osmosis or distilled water, calculated by the BrewWaterSolver solver with the most common homebrew salts.

Salt5 gal (18.9 L)20 L
Gypsum (CaSO₄)35.43 g37.44 g
Epsom salt (MgSO₄)22.72 g24.01 g
Chalk (CaCO₃)5.44 g5.75 g
Baking soda (NaHCO₃)0.77 g0.82 g

The common salts reproduce every ion within 10%.

Chalk (CaCO₃) doesn't dissolve well directly in mash or sparge water without dissolved CO₂ - slurry it in carbonated water (e.g. sparkling water) before adding it, rather than mixing it into still water or sprinkling it in dry, or the calculated amount may not fully dissolve. How to dissolve chalk with CO₂

Where these numbers come from

Vosges region, France, near the Vittel and Contrex sources.

Open Hepar in the solver →