A pale, low-to-moderate strength Belgian ale, the lightest beer traditionally brewed by Trappist monasteries.
The target has a sulfate-to-chloride ratio of 0.8:1 (malt-leaning, balanced) - the balance that shapes how hoppy or malty the beer tastes.
| Ion | Target (ppm) |
|---|---|
| Calcium (Ca²⁺) | 60 |
| Magnesium (Mg²⁺) | 5 |
| Sodium (Na⁺) | 10 |
| Chloride (Cl⁻) | 80 |
| Sulfate (SO₄²⁻) | 65 |
| Bicarbonate (HCO₃⁻) | 20 |
Useful starting target, but recipe composition or regional interpretation can materially change the optimum. Verify mash pH and sensory balance.
Salts to add to reverse-osmosis or distilled water to reach this target, calculated by the BrewWaterSolver solver with the most common homebrew salts (calcium chloride, gypsum, Epsom salt, chalk and baking soda).
| Salt | 5 gal (18.9 L) | 20 L |
|---|---|---|
| Calcium chloride (CaCl₂) | 3.00 g | 3.17 g |
| Gypsum (CaSO₄) | 1.52 g | 1.61 g |
| Epsom salt (MgSO₄) | 0.81 g | 0.86 g |
| Baking soda (NaHCO₃) | 0.45 g | 0.47 g |
Resulting water: Ca 64.9, Mg 5.2, Na 9.4, Cl 79.5, SO4 62.6, HCO3 20.1 ppm. Split the salts between mash and sparge water in the solver if you prefer.
With RO water and the salts above, a typical Trappist Single grist is predicted to mash at pH 5.56, against a target of 5.30 (pale color - lower pH enhances crispness). To bring it down, add about 4.8 mL of 88% lactic acid for 5 gal (5.1 mL for 20 L).
Estimated from the style's typical color (SRM 5) without a real grain bill - enter your recipe in the solver for a sharper prediction, and always check with a pH meter.