SilberQuelle mineral water profile

SilberQuelle is a still water from Austria. Calcium-bicarbonate type, low mineralization. Same water sold as: lightly sparkling, sparkling, still.

SilberQuelle mineral content

Ionmg/L
Calcium (Ca²⁺)79.9
Magnesium (Mg²⁺)30.5
Sodium (Na⁺)8.8
Chloride (Cl⁻)17.5
Sulfate (SO₄²⁻)113.7
Bicarbonate (HCO₃⁻)241
At a glance
Total of these six minerals491.4 mg/L
Total hardness (as CaCO₃)325.1 mg/L
Alkalinity (as CaCO₃)197.6 mg/L
Sulfate-to-chloride ratio6.5:1

How to recreate SilberQuelle from RO or distilled water

Mineral salts to dissolve in reverse-osmosis or distilled water, calculated by the BrewWaterSolver solver with the most common homebrew salts.

Salt5 gal (18.9 L)20 L
Calcium chloride (CaCl₂)0.57 g0.60 g
Epsom salt (MgSO₄)5.56 g5.88 g
Chalk (CaCO₃)3.35 g3.54 g
Baking soda (NaHCO₃)0.40 g0.43 g

The common salts reproduce every ion within 10%.

Chalk (CaCO₃) doesn't dissolve well directly in mash or sparge water without dissolved CO₂ - slurry it in carbonated water (e.g. sparkling water) before adding it, rather than mixing it into still water or sprinkling it in dry, or the calculated amount may not fully dissolve. How to dissolve chalk with CO₂

Where these numbers come from

Ca/Mg/Na/HCO3 from h2omatch.com's database; sulfate/chloride researched (confidence: High).

View the original analysis

Open SilberQuelle in the solver →