Liquid Death mineral water profile

Liquid Death is a still water from USA. Calcium-bicarbonate type, low mineralization.

Liquid Death mineral content

Ionmg/L
Calcium (Ca²⁺)30
Magnesium (Mg²⁺)5.7
Sodium (Na⁺)2.8
Chloride (Cl⁻)1.4
Sulfate (SO₄²⁻)9.7
Bicarbonate (HCO₃⁻)111
At a glance
Total of these six minerals160.6 mg/L
Total hardness (as CaCO₃)98.4 mg/L
Alkalinity (as CaCO₃)91 mg/L
Sulfate-to-chloride ratio6.9:1

How to recreate Liquid Death from RO or distilled water

Mineral salts to dissolve in reverse-osmosis or distilled water, calculated by the BrewWaterSolver solver with the most common homebrew salts.

Salt5 gal (18.9 L)20 L
Epsom salt (MgSO₄)0.45 g0.48 g
Chalk (CaCO₃)1.43 g1.51 g
Baking soda (NaHCO₃)0.02 g0.02 g

Closest match with these salts; it can't reach HCO3 96.1 mg/L vs 111 exactly.

Chalk (CaCO₃) doesn't dissolve well directly in mash or sparge water without dissolved CO₂ - slurry it in carbonated water (e.g. sparkling water) before adding it, rather than mixing it into still water or sprinkling it in dry, or the calculated amount may not fully dissolve. How to dissolve chalk with CO₂

Where these numbers come from

3300 Artesian Well (Wilderness Asset Holdings), Bland, Virginia (Blue Ridge Mountains). Values from brand website. Analysis/label date: Date of report: Quarter 1, 2026 (Compliance Designs report #1265-342). Report prints bicarbonate as CaCO3 (equal to alkalinity); converted x1.22 to HCO3.

View the original analysis

Open Liquid Death in the solver →