Elmer mineral water profile

Elmer is a still water from Switzerland. Calcium-bicarbonate type, low mineralization. Same water sold as: sparkling, still.

Elmer mineral content

Ionmg/L
Calcium (Ca²⁺)112
Magnesium (Mg²⁺)8
Sodium (Na⁺)3
Chloride (Cl⁻)1
Sulfate (SO₄²⁻)120
Bicarbonate (HCO₃⁻)230
At a glance
Total of these six minerals474 mg/L
Total hardness (as CaCO₃)312.6 mg/L
Alkalinity (as CaCO₃)188.6 mg/L
Sulfate-to-chloride ratio120.0:1

How to recreate Elmer from RO or distilled water

Mineral salts to dissolve in reverse-osmosis or distilled water, calculated by the BrewWaterSolver solver with the most common homebrew salts.

Salt5 gal (18.9 L)20 L
Gypsum (CaSO₄)3.06 g3.23 g
Epsom salt (MgSO₄)1.35 g1.43 g
Chalk (CaCO₃)3.48 g3.67 g

The common salts reproduce every ion within 10%.

Chalk (CaCO₃) doesn't dissolve well directly in mash or sparge water without dissolved CO₂ - slurry it in carbonated water (e.g. sparkling water) before adding it, rather than mixing it into still water or sprinkling it in dry, or the calculated amount may not fully dissolve. How to dissolve chalk with CO₂

Where these numbers come from

Ca/Mg/Na/HCO3 from h2omatch.com's database; sulfate/chloride researched (confidence: High). Producer analysis. Chloride reported <1 mg/L; stored as 1.0 mg/L upper bound.

View the original analysis

Open Elmer in the solver →